LoRa Street Lighting
13/03/2019
GPRS Ethernet Protocol Converter
GPRS Ethernet Protocol Converter
27/02/2019

IoT gateway in substation automation

IoT gateway in substation automation

Gateways are an important part in Substation Automation Systems (SAS).These are hardened communication devices which collect metering, status, events and fault report data from any protection device inside substation. The gateway sends this information upstream to a Control center, and transfers commands issued from the control center to devices inside the substation.

Heyuan’s intelligent gateway ASDU-LS perform the communication interface between the electrical substation and the area dispatch centers (SCADA) to transmit substation indications and measurements to SCADA, and dispatch SCADA’ commands to the substation control system. Also provides invaluable information for planning, management, maintenance and fault response via secure remote access.

Key Features:
Cloud debugging Data file (at least 7 days)
Linux 4.1
Embedded various communication protocols: Modbus-RTU Protocol, Modbus-TCP/IP Protocol, DL/T-645 Protocol, IEC60870-102,103,104 Protocol, MQTT Protocol, HTTP Protocol etc.
Ethernet: 2* independent Ethernet ports, 10/100Mbps
USB: 1*USB OTG
Serial Ports: 4* isolated RS485
CAN: 1*isolated CAN2.0
Extension: 1*Mini-PCIe (2G/3G/GPRS/4G optional)
Send Inquiry
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. You can leave a message directly to us, we will reply to you within 24 hours after receiving!
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad